FreeScan Combo+ Wireless
$16,999.00
View FreeScan Combo+ Wireless
A dense mesh can look convincing while still being unsuitable for accepting a machined part. Before comparing scanner specifications, identify the dimensions you must measure, their tolerances, and how the result will be checked.
3D scanner accuracy and resolution describe different things. An accuracy specification concerns measurement performance under stated conditions. Point spacing describes how closely sampled points are placed. A smaller point-spacing setting does not prove a smaller measurement error, and neither number alone establishes that a scanner can inspect your part.
In formal metrology, accuracy is a qualitative concept, not a numerical quantity. Scanner manufacturers nevertheless commonly use an "accuracy" label for a numerical performance specification. Read the associated test method and conditions rather than treating that label as a complete uncertainty statement. The international vocabulary of metrology definition of accuracy makes this distinction explicit.
| Term | What to check | What it does not establish |
|---|---|---|
| Accuracy specification | Reported error limits or performance, test method, measurement mode, and conditions. | The uncertainty of every measurement on your production part. |
| Point spacing | Sampling density and whether the smallest required features are adequately captured. | That every point is located within that distance of the true surface. |
| Repeatability | Agreement between repeated measurements under specified repeatability conditions. | Freedom from a consistent measurement bias. |
| Volumetric performance | How a stated specification applies across a measurement length or volume. | That a short-distance result can be applied unchanged to a large assembly. |
| Measurement uncertainty | The uncertainty associated with the result from the complete measurement process. | A value obtained simply by copying the scanner's headline specification. |
Also ask what the supplier means by "resolution." The metrology definition of resolution concerns a detectable change in indication; a scanner's point-spacing setting is a sampling parameter. Do not silently substitute one for the other. Likewise, measurement precision describes agreement among repeated measurements, not closeness to a reference value.
The FreeScan Combo+ Wireless metrology scanner illustrates why the specification columns must stay separate. Shining 3D lists accuracy of 0.02 mm and point distance from 0.01 to 10 mm. The 0.01 mm setting does not turn the scanner into a 0.01 mm accuracy instrument.
The manufacturer's current Combo Wireless series specifications list volumetric accuracy as 0.02 mm + 0.03 mm/m, and 0.02 mm + 0.015 mm/m with video photogrammetry. Those are different configurations. Confirm the applicable procedure and measurement length with the supplier before using either expression in an acceptance plan.
Confirm the exact model in a quote; the wired Combo+ and base Combo Wireless are different models. FreeScan capture software is included. Separately listed compatible inspection and CAD applications are not automatically included licenses; confirm the quoted package.
Consider a bracket with two locating bores and a curved outer surface. A scan may reproduce the outer shape well while giving you limited data inside the bores. The important question is whether the chosen workflow can evaluate the required bore locations relative to the drawing datums.
For that test, agree on the reference measurement, alignment, feature-extraction method, and acceptance rule before scanning. A best-fit alignment that makes a surface color map look good may answer a different question from an alignment based on the drawing's datum scheme.
NIST's research on error sources in structured-light 3D scanners explains that standard test artifacts and conditions may not represent the surfaces and geometries encountered in use. The practical implication is to test the application, not only review a certificate.
Fine sampling is useful when the required geometry warrants it. Applying the smallest spacing across a large, mostly smooth part can produce larger files and more processing work without resolving the measurement question.
Start with the smallest feature that matters, the accessible surface, and the required downstream operation. A reverse-engineering mesh for a clearance envelope and an inspection data set for a tight-tolerance locating feature need different acceptance criteria. Check that the software settings preserve the geometry you intend to measure.
Reflective surfaces introduce another set of decisions. The wired Combo+ guide to reflective-metal inspection covers surface preparation and validation considerations. Its hardware specifications describe the wired model, not Combo+ Wireless.
Send a dimensioned drawing or a list of critical features, the overall part size, material and finish, expected throughput, and the required output. Identify whether you need surface comparison, feature measurements, a formal inspection report, or CAD reconstruction.
Ask for separate confirmation of capture software, inspection software, CAD software, and workstation requirements. Compatibility with an application does not necessarily mean its license is included. Request the current operating-system requirements before purchasing a workstation; do not assume macOS support from another scanner in the same brand.
Use SKYLAB3D's industrial 3D scanning and inspection guide to define the workflow, then compare the industrial and metrology scanner range. If Combo+ Wireless is on your shortlist, ask SKYLAB3D to review its fit for your inspection requirements.
$16,999.00
View FreeScan Combo+ WirelessNot by itself. Finer point spacing can provide denser sampling, but it does not establish lower measurement error. Evaluate the stated performance specification, the required feature geometry, and the complete measurement workflow.
There is no single accuracy number suitable for every part. Start with the drawing tolerances and required features, then evaluate measurement uncertainty, repeatability, alignment, and the acceptance rule using representative parts and a suitable reference method.
No. Some surfaces and features may be inaccessible or unsuitable for optical capture. Validate the proposed method against the drawing requirements and retain probing, gauges, or CMM measurements where they are needed.
No. They are separate models. Confirm the exact model, scanning mode, applicable specifications, software, and accessories when comparing a quote or planning a demonstration.
{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}