EINSTAR 2 3D Scanner
$854.00
View EINSTAR 2 3D Scanner
EINSTAR 2 can capture small and medium replacement parts as a mesh for scan-to-CAD work when the goal is to reconstruct editable geometry, not certify dimensions from the scan alone. Its 17-line blue-laser mode supports detailed capture, while infrared mode helps cover broader geometry before the model is rebuilt and checked in CAD.
A broken bracket, obsolete cover, or undocumented housing often contains the only surviving definition of a part. Scanning preserves its as-found shape, but the mesh is evidence - not automatically a manufacturing drawing. A reliable replacement-part workflow separates capture, CAD reconstruction, design decisions, and final verification.

EINSTAR 2 fits maintenance and small-manufacturing projects that need portable capture of accessible part geometry before an engineer rebuilds the design in CAD. It is best treated as a reverse-engineering capture tool. Projects requiring traceable acceptance measurements, controlled uncertainty, or formal inspection records need a validated metrology workflow instead.
Good candidates include machine brackets, guards, covers, ducts, housings, handles, and fit-up components whose original CAD is unavailable. The part must be safe to remove or scan, and the team must decide whether the replacement should reproduce wear or restore intended geometry.

Laser HD and IR Rapid solve different capture problems. Official EINSTAR 2 specifications list 17 blue parallel laser lines and resolution settings from 0.05 to 10 mm in Laser HD mode. IR Rapid mode uses infrared VCSEL projection, a larger field of view, and feature, texture, marker, or hybrid alignment options.
| Decision factor | Laser HD | IR Rapid |
|---|---|---|
| Typical role | Detailed geometry and controlled local capture | Broader form and faster coverage |
| Published scan speed | Up to 2.5 million points per second | Up to 4.8 million points per second |
| Maximum field of view | 490 x 580 mm | 1170 x 1385 mm |
| Alignment options | Global marker or markers | Global marker, markers, features, texture, or hybrid |
| Working distance | 100 to 600 mm | 160 to 1400 mm |
Resolution describes the spacing or detail level of acquired points; it is not a statement of measurement accuracy. The official EINSTAR 2 product specifications do not publish a metrology accuracy claim, so acceptance requirements should not be inferred from the 0.05 mm resolution setting.
Share the part size, surface, smallest critical feature, required CAD output, and how the finished replacement will be verified. SKYLAB3D can help determine whether an entry-level capture workflow is appropriate or whether the project needs metrology-grade inspection controls.
Preparation begins with the engineering question, not the scanner. Record the part condition, identify functional interfaces, establish scale and orientation, and decide which geometry must remain untouched. Reflective, dark, or translucent surfaces may require an approved scanning aid, while repeated or low-feature regions may need markers for stable alignment.
The scanner exports a polygon mesh or point-based file, not a manufacturing-ready parametric model. EINSTAR 2 supports STL, OBJ, PLY, 3MF, and ASC output. The reverse-engineering step then uses the mesh as a reference for datums, sections, analytic features, surfaces, and design-intent decisions inside CAD software.
A disciplined workflow does not trace every bump. It distinguishes four kinds of evidence:
For a broader view of the reconstruction process, see SKYLAB3D's industrial 3D scanning and reverse-engineering workflow. If the project is primarily automotive and benefits from crossed-line portable capture, compare the distinct role described in the EINSTAR Rockit car-part reverse-engineering guide. The full Shining 3D industrial scanner collection covers entry-level through metrology-grade paths.

Verification must be chosen before release and matched to the consequence of failure. Compare the CAD model with the cleaned mesh to find reconstruction errors, then verify critical interfaces with suitable measurement equipment, test fit, functional checks, or a validated inspection process. Scanner output alone does not establish traceability or conformity.
For low-risk fit-up components, a controlled test fit may be appropriate. For load-bearing, pressure-retaining, rotating, regulated, or safety-related parts, involve the responsible engineer and use the organization's approved material, inspection, and release procedures. Under NIST guidance, traceability depends on a documented chain of calibrations and stated measurement uncertainties; it does not come from a scanner name alone.

EINSTAR 2 is portable, but the complete workflow still depends on computing capacity, battery planning, lighting, and data transfer. Official specifications list a 420 g scanner weight with battery, USB-C connectivity, a 5500 mAh battery, and Windows 11 requirements beginning with an RTX 3060-class laptop GPU and 32 GB of dual-channel memory.
Shining 3D lists outdoor illumination limits below 110,000 lux for Laser HD and 70,000 lux for IR Rapid, with an operating range of -10 to 40 degrees C. These are equipment limits, not a guarantee that every surface or environment will scan successfully. Validate the actual part, lighting, vibration, access, and workstation before committing to a production process.
No. EINSTAR 2 exports mesh or point-based formats including STL, OBJ, PLY, 3MF, and ASC. Editable parametric CAD requires a separate reverse-engineering step that reconstructs design features from the scan evidence.
No. Resolution and measurement accuracy are different properties. The official EINSTAR 2 specifications list a 0.05 mm Laser HD resolution setting but do not publish a metrology accuracy claim.
It can be captured as found, but reproducing the worn shape may repeat the failure. The CAD reconstruction should separate intended geometry from wear, damage, distortion, and manufacturing variation.
Use a validated metrology workflow when the scan supports dimensional acceptance, tolerance verification, regulated records, supplier approval, or a safety-critical release decision. Define the required uncertainty and traceability before selecting equipment.
Planning an obsolete-part replacement? Describe the component, required CAD output, critical interfaces, and release method. We will help separate an entry-level capture task from a metrology-controlled project.
$854.00
View EINSTAR 2 3D Scanner{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}